Stepper Gears: Dash Disassembly, Steps 1-5

[Steppers Access (Index)] [Introduction] [Tools & Parts]
[Steps 6-11] [Steps 12-15] [Steps 16-20] [Steps 21-25] [Steps 26-30]
[Steps 31-35] [Steps 36-40] [Steps 41+]

	1. First, run both front seats all the way back and down - also make sure the seat backs are near vertical. 2. Next, write down all of the radio station presets. We must disconnect the battery and the presets may be lost. 3. If the vehicle has a factory alarm - use the alarm key to disable the system. 4. In the trunk, remove the battery cover and disconnect the battery.
	5. LHD Remove the passenger side "a" pillar trim. Remove the two screws from the grab handle - remove the handle and slip out the trim piece. 5. RHD Remove both passenger and driver's side "a" pillar trims in the same way (driver's side has two screws but no grab handle).